Spray pyrolysis deposition of undoped SnO2 and In2O3 films and their structural properties

In this paper the results of structural analysis of the SnO₂ and In₂O₃ films deposited by spray pyrolysis are presented. The main goals of this analysis are summarizing the results obtained in this field, highlighting a correlation between parameters of film deposition and the material structure and formulating some general regularities, typical for metal oxides. Peculiarities and mechanisms of pyrosol deposition as well as advantages and disadvantages of this technology for deposition of the films with required parameters were also discussed. It is shown that this technology has great potential for controlling structural parameters of metal oxides such as thickness, the grain size, texturing, roughness, the grain faceting and the porosity.     

A theory of flux peaking effect in channeling

The redistribution of the channeled ion flux in the transverse plane has been examined. General formulae describing the flux peaking effect are obtained. Main factors on which the effect depends are investigated. An analysis is made of back-scattering experiments. The study has been made for the axial and planar channeling.     

Structural originations of irreversible capacity loss from highly lithiated copper oxides

We use electrochemistry, high-energy X-ray diffraction (XRD) with pair-distribution function analysis (PDF), and density functional theory (DFT) to study the instabilities of Li₂CuO₂ at varying state of charge. Rietveld refinement of XRD patterns revealed phase evolution from pure Li₂CuO₂ body-centered orthorhombic (Immm) space group to multiphase compositions after cycling. The PDF showed CuO₄ square chains with varying packing during electrochemical cycling. Peaks in the G(r) at the Cu-O distance for delithiated, LiCuO₂, showed CuO₄ square chains with reduced ionic radius for Cu in the 3+ state. At full depth of discharge to 1.5 V, CuO was observed in fractions greater than the initial impurity level which strongly affects the reversibility of the lithiation reactions contributing to capacity loss. DFT calculations showed electron removal from Cu and O during delithiation of Li₂CuO₂.     

Direct dynamics studies for the reactions of CF3CHFCF3 and CF3CF2CHF2 with H atoms

The rate constants of the hydrogen abstraction reactions of CF₃CHFCF₃ + H (R1) and CF₃CF₂CHF₂ + H (R2) have been calculated by means of the dual-level direct dynamics method. Optimized geometries and frequencies of stationary points and extra points along the minimum-energy path (MEP) are obtained at the MPW1K/6-311+G(d,p) level, and the classical energetic information is further corrected with the interpolated single-point energy (ISPE) approach by the G3(MP2) level of theory. Using the canonical variational transition state theory (CVT) with small-curvature tunneling corrections (SCT), the rate constants are evaluated over a wide temperature range of 200-2000 K. The calculated CVT/SCT rate constants are in good agreement with available experimental values. It is found that the variational effect is very small and almost negligible over the whole temperature region. However, the small-curvature tunneling correction plays an important role in the lower temperature range. Furthermore, the heats of formation of species CF₃CF₂CHF₂ (SC₁ or SC₂) and CF₃CF₂CF₂ are studied using isodesmic reactions to further elucidate the thermodynamic properties.     

激发态Cs2和H2的电子-振转能级的碰撞转移

利用相干反斯托克斯拉曼光谱(CARS)探测技术, 研究了激发态Cs2与H2间的电子-振转能级的碰撞转移。用波长为532 nm和中心波长为716 nm的两束激光同时聚焦到样品池中, 扫描CARS谱确认了H2分子的S支(△v =1, △J=2)仅在v=1, J=4,5及v=2, J=3,4能级上有布居, 用n1、n2、n3、n4分别表示(2,4)、(2,3)、(1,4)及(1,5)上的粒子数密度。从CARS线的峰值得到n2/n1、n3/n1、n4/n1分别为6.34±1.27、3.66±0.73和1.45±0.29。转移能配置到振动、转动和平动的比例分别为0.44、0.06和0.50, 能量主要分配在振动和平动上。在T=523 K和PH2=2.5×103 Pa条件下, 通过求解速率方程组和对时间分辨CARS线轮廓的分析, 得到碰撞转移速率系数k1=(6.0±1.2)×10-14 cm-3s-1和k2=(4.0±0.8)×10-13cm-3 s-1。     

双分子水和氨气催化CF3OH分子裂解的理论研究

利用G3和CBS-QB3的理论方法研究CF₃OH分子裂解成FCFO和HF,并考虑大气中双分子和氨气对CF₃OH分子裂解的催化作用. 理论计算表明：由于在G3的理论水平下,计算的能垒为188.52 kJ/mol,所以CF₃OH分子在大气条件下不可能发生单分子裂解;当氨气和双分子水被加入时,能垒都被降到25.08 kJ/mol,起了强的催化作用. 除此之外,应用过渡态理论对速率常数进行了计算,计算结果表明：氨气催化CF₃OH分子的速率常数是单分子和双分子催化CF₃OH分子裂解速率常数的10⁹和10⁵倍. 考虑到大气中这些物质的浓度,计算结果预测了氨气催化CF₃OH分子裂解在大气中起到重要的作用.     

粉末活性炭对模拟间苯二酚废水的吸附

在静态条件下,研究了粉末活性炭对间苯二酚废水的吸附效果,通过实验优化了吸附条件,并在最佳处理效果下探究其吸附模式。结果表明,当水样pH值为4,温度30℃,活性炭用量0.3g,振荡时间10m in,振荡速率为120r/m in时,对废水的处理效果最佳。拟合得到活性炭吸附间苯二酚的模式符合F reund lich吸附模式。     

Potential theory of infinite dimensional Lévy processes

We study the potential theory of a large class of infinite dimensional Lévy processes, including Brownian motion on abstract Wiener spaces. The key result is the construction of compact Lyapunov functions, i.e., excessive functions with compact level sets. Then many techniques from classical potential theory carry over to this infinite dimensional setting. Thus a number of potential theoretic properties and principles can be proved, answering long standing open problems even for the Brownian motion on abstract Wiener space, as, e.g., formulated by R. Carmona in 1980. In particular, we prove the analog of the known result, that the Cameron-Martin space is polar, in the Lévy case and apply the technique of controlled convergence to solve the Dirichlet problem with general (not necessarily continuous) boundary data.     

A stochastic approach to capture crystal plasticity

A stochastic crystal plasticity model is proposed and applied within the rate-independent regime. As opposed to conventional deterministic algorithms wherein multiple slip systems are activated and redundant constraints may exist, the new Monte Carlo plasticity (MCP) paradigm is based on a stochastic chain of singly activated slip systems and thus avoids the possible ill-condition associated with multi-slip algorithms. The choice of the activated slip system is made at each Monte Carlo (MC) step based on the Metropolis algorithm. The MCP model is implemented within a Material Point Method (MPM) as a constitutive model to capture the elasto-plastic behavior of polycrystalline materials. A comparison with a commonly used singular value decomposition (SVD) algorithm indicates that MCP offers superior computational efficiency while maintaining comparable accuracy.     

Carbon-coated Li3VO4 with optimized structure as high capacity anode material for lithium-ion capacitors

Due to the high capacity, moderate voltage platform, and stable structure, Li₃VO₄ (LVO) has attracted close attention as feasible anode material for lithium-ion capacitor. However, the intrinsic low electronic conductivity and sluggish kinetics of the Li⁺ insertion process severely impede its practical application in lithium-ion capacitors (LICs). Herein, a carbon-coated Li₃VO₄ (LVO/C) hierarchical structure was prepared by a facial one-step solid-state method. The synthesized LVO/C composite delivers an impressive capacity of 435 mAh/g at 0.07 A/g, remarkable rate capability, and nearly 100% capacity retention after 500 cycles at 0.5 A/g. The superior electrochemical properties of LVO/C composite materials are attributed to the improved conductivity of electron and stable carbon/LVO composite structures. Besides, the LIC device based on activated carbon (AC) cathode and optimal LVO/C as anode reveals a maximum energy density of 110 Wh/kg and long-term cycle life. These results provide a potential way for assembling the advanced hybrid lithium-ion capacitors.